cerasonar 9060x4

Large-sized sound panel with higher load-capacity for room sizes of 20-60 square meters. Ideal for multiroom or surround applications. Also useable in single-stereo speaker mode. Qualified for dry walls and suspended ceilings with a substructure spacing of 62.5 cm and a depth of 6 cm. Installation in solid walls and ceilings possible with the use of the optional mounting frame.

Single-Stereo ***

This invisible speakers can also be configured as a single stereo (both channels of a panel).
Power rating: 2 x 50 Watt 4 Ohm


Cerasonar Flyer
Datasheets and installing

Installation options

– Dry Wall 1- or 2-layer of 12,5mm GK
– Solidwall with 9060x mounting frame
– Achievable surface quality Q3 / Q4


Technical specifications

Power rating: 100 W * (200 W ** ) / 2 x 50 Watt ***
Impedance: 8 Ohm / 2 x 4 Ohm ***
Frequency range: 50 – 18.000 Hz *
Dispersion range: 180° x 180° h./v.
Sensitivity: 85 dB 1 W/1 m
Dimensions: 90 x 60 cm
Installation cutout: 80 x 50 cm
Overall depth: 5,6 cm
Weight: 3,0 Kg

Application areas

Multiroom audio
Surround systems
Conference and media rooms
Exhibitions, trade fairs, museums
Gastronomy, hotels, spas
Stores, sales rooms, POS

* Power rating as per application of  a high-pass filter. No electronic low-frequency boost must be used. Resulting damage from mechanical overload are excluded from the warranty.

** Max. pulse power rating. The load capacity can be increased when operated via electronic high-pass filters of an AV receiver (min. 150 Hz / 12 dB) and speaker size set to „small“ or in conjunction with a multiroom amplifier with respective equalization adjustment options.

*** Single-Stereo – this term expresses a special configuration mode of the speaker, which then is connected simultaneously to the left and right amplifier channels. This is useful in long corridors or small spaces such as restrooms in which no stereo base is audible. The models 9060×4, 6060×4, 6060×2, 4062×2 and 3060×2 are ready for this feature by using different cable combinations.