cerasonar 9060sub+

Total invisible Subwoofer to combine with all cerasonar sound panels. Qualified for dry masonry walls with a substructure spacing of 62.5 cm and inside depth of 10 cm. The use of high-pass filters with the full-range panels relieve these from low frequencies in order to allow the 9060sub to reproduce the bass with a higher maximum volume.


Downloads

Cerasonar Flyer
Datasheets and installing


Installation options

– Dry Wall 1- or 2-layer of 12,5mm GK
– Solidwall with 9060x mounting frame
– Achievable surface quality Q3 / Q4

These models from our range of invisible speakers generate more bass energy than our pure Exciter panels. Therefore, the speaker must be spackled with a flexible fine filler. We were able to document good results with the Knauf Uniflott and Ardex 828 products. Do not install too early – a good example to follow is the parquet layer, which starts his work only after a building moisture check with appropriate results has been carried out.

9060sub


Technical specifications

Power rating: 240 Watt
Impedance: 4 Ohm
Frequency range: 25 – 150 Hz
Dispersion range: hemispherical
Sensitivity: 85 dB 1 W/1 m
Dimensions: 90 x 60 cm
Installation cutout: 80 x 50 cm
Overall depth: 9,6 cm
Weight: 8,0 Kg


Application areas

Multiroom audio
Surround systems
Conference and media rooms
Exhibitions, trade fairs, museums
Gastronomy, hotels, spas
Stores, sales rooms, POS