cerasonar 4062x2 hp

High-Performance Soundpanel for room sizes of 20-60 square meters. Ideal for multiroom or surround applications. Also useable in single-stereo speaker mode. Qualified for dry walls and suspended ceilings with a substructure spacing of 62.5 cm or 40 cm


Single-Stereo ***

This invisible speakers can also be configured as a single stereo (both channels of a panel).
Power rating: 2 x 25 Watt 8 Ohm


Downloads

Cerasonar Flyer
Datasheets and installing


Installation options

– Dry Wall 1- or 2-layer of 12,5mm GK
– Achievable surface quality Q3 / Q4

4062x2


Technical specifications

Power rating: 50 W * (100 W ** ) / 2 x 25 Watt ***
Impedance: 4 Ohm / 2 x 8 Ohm ***
Frequency range: 60 – 18.000 Hz *
Dispersion range: 180° x 180° h./v.
Sensitivity: 90 dB 1 W/1 m
Dimensions: 40 x 62 x 5,6 cm
Installation in:  only plasterboard 12,5 mm
Alcove depth: 5,6 cm
Weight: 1,8 Kg


Application areas

Multiroom audio
Surround systems
Conference and media rooms
Exhibitions, trade fairs, museums
Gastronomy, hotels, spas
Stores, sales rooms, POS


* Power rating as per application of  a high-pass filter. No electronic low-frequency boost must be used. Resulting damage from mechanical overload are excluded from the warranty.

** Max. pulse power rating. The load capacity can be increased when operated via electronic high-pass filters of an AV receiver (min. 150 Hz / 12 dB) and speaker size set to „small“ or in conjunction with a multiroom amplifier with respective equalization adjustment options.

*** Single-Stereo – this term expresses a special configuration mode of the speaker, which then is connected simultaneously to the left and right amplifier channels. This is useful in long corridors or small spaces such as restrooms in which no stereo base is audible. The models 9060×4, 6060×4, 6060×2 and 3060×2 are already factory equipped with this feature using a cable jumper.